Timing belts
This type of power transmission allows you to cover long distances without adding lubrication. They operate with minimal noise and produce hardly any vibration. Most materials for these belts are rubber and plastic.
Timing belt set 25-T10-700 + 6.4 mm for Bosch packaging machines
€150.00*
USP private label timing belt set functions by the action of friction. The timing belt consists of two combined parts, the timing belt (black) and the coating (red). The black timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is less wear-resistant due to the action of friction, but on the other hand it provides more grip.The polyurethane timing belt has a width of 50 mm and has 92 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The red coating has a hardness of 40 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The linatex coating occurs in different hardnesses. The most common hardnesses are 30, 35 and 40 Shore-A. A linatex topcoat occurs primarily in the colors red and white.
USP-ID:
BAFO0066
Timing belt set 1133420 | 50-T10-630 + 4.5 mm for ROVEMA packaging machines
€180.00*
USP private label timing belt set 1133420 functions by the action of vacuum. The timing belt consists of two combined parts, the timing belt (black) and the coating layer (red). The black timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The neoprene timing belt has a length of 630 mm, a width of 30 mm and has 63 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The red coating has a hardness of 35 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 35, 50 and 60 Shore-A. A coating of silicone occurs primarily in the colors red and white.
USP-ID:
BAVB0123
Timing belt set 120004104700 | 50-T10-630 + 6.4 mm for ROVEMA packaging machines
€140.00*
USP private label timing belts set 120004104700 function by the action of friction. The timing belts consist of two combined parts, the timing belt (black) and the coating (red). The black timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is less wear-resistant due to the action of friction, but on the other hand it provides more grip.The neoprene timing belt has a width of 25.4 mm and has 60 teeth. The tooth pitch is implemented in a type H variant. This means that the tooth pitch has a standard dimension of 9,525 mm. The red coating has a hardness of 35 Shore-A. In addition, the endless belt is temperature resistant to c.a. 150 .C and is easy to clean.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30, 35 and 50 Shore-A. A coating of silicone occurs mainly in the colors red, white, blue and transparent. Silicones are synthetic substances with a versatility of applications and are mostly heat-resistant and rubber-like. The term silicone is also referred to as SI.
USP-ID:
BAFO0130
Timing belt set 120704100200 | 50-T10-630 + 4.5 mm for ROVEMA packaging machines
€190.00*
USP private label timing belts 120704100200 function by vacuum. The timing belt consists of two combined parts, the timing belt (black) and the coating (red). The black timing belt is made of neoprene and is completed with a linatex coating. This linatex coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The neoprene timing belt has a width of 25.4 mm and has 72 teeth. The tooth pitch is implemented in a type L variant. This means that the tooth pitch has a standard dimension of 9,525 mm. The red coating has a hardness of 35 Shore-A. All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The linatex coating occurs in different hardnesses. The most common hardnesses are 30, 35 and 40 Shore-A. A linatex coating occurs primarily in the colors red and white.
USP-ID:
BAVB0122
Timing belt set 120704101401 | 30-T10-630 + 4.5 mm for ROVEMA packaging machines
€120.00*
USP private label timing belt set 120704101401 functions by the action of vacuum. The drive belt consists of two combined parts, the timing belt (black) and the coating layer (red). The black timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The neoprene timing belt has a length of 630 mm, a width of 30 mm and has 63 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The red coating has a hardness of 35 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 35, 50 and 60 Shore-A. A coating of silicone occurs primarily in the colors red and white.
USP-ID:
BAVB0049
Timing belt set 1226 | 225-L-100 + 6 mm for Sandiacre packaging machines
€105.00*
USP private label timing belt set 1226 functions by the action of friction. The timing belt consists of two combined parts, the timing belt (gray) and the coating (blue). The gray timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is less wear-resistant due to the action of friction, but on the other hand it provides more grip.The polyurethane timing belt has a length of 920 mm, a width of 50 mm and has 92 teeth. The tooth pitch is implemented in a type L variant. This means that the tooth pitch has a standard dimension of 7.5 mm.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30, 50 and 60 Shore-A. A coating of silicone occurs mainly in the colors yellow, red and white. The silicone coating is temperature resistant up to 150 degrees Celsius and is easy to clean.
USP-ID:
BAFO0047
Timing belt set 16-T10-560 + 6.4 mm for ILAPAK packaging machines
€80.00*
USP private label timing belt set functions by the action of friction. The timing belt consists of two combined parts, the timing belt (black) and the coating (red). The black timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is less wear-resistant due to the action of friction, but on the other hand it provides more grip.The polyurethane timing belt has a length of 920 mm, a width of 50 mm and has 92 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 7.5 mm.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30,50 and 60 Shore-A. A coating of silicone occurs mainly in the colors yellow, red and white. The silicone coating is temperature resistant up to 150 degrees Celsius and is easy to clean.
USP-ID:
BAFO0028
Timing belt set 2003013549 | 25-T5-1100-DL for Aquarius packaging machines
€62.00*
USP private label timing belts function by friction. The timing belt consists of two combined parts, the timing belt (white) and the coating (white). The white timing belt is made of polyurethane.The polyurethane timing belt has a length of 1100 mm, a width of 25 mm and has 220 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 5 mm.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The polyurethane coating occurs in different hardnesses. The most common hardnesses are 25, 30, 50 and 60 Shore-A. A polyurethane coating is found primarily in red and white.
USP-ID:
BAFO0002
Timing belt set 2003282048 | 50-T10-920 + 3 mm for Aquarius packaging machines
€240.00*
USP private label timing belt set 2003282048 functions by the action of vacuum. The drive belt consists of two combined parts, the timing belt (brown/orange) and the coating layer (blue). The brown/orange timing belt is made of polyurethane and is complemented by a polyurethane coating. This polyurethane coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The polyurethane timing belt has a length of 920 mm, a width of 50 mm and has 92 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The blue coating has a hardness of 60 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The polyurethane coating occurs in different hardnesses. The most common hardnesses are 25, 35, 50 and 60 Shore-A. A coating of polyurethane occurs primarily in the colors red and white.
USP-ID:
BAVB0149
Timing belt set 2003409758 | 50-T10-920 + 3 mm for Aquarius packaging machines
€350.00*
USP private label timing belt set 2003409758 functions by the action of vacuum. The drive belt consists of two combined parts, the timing belt (brown/orange) and the coating (yellow). The brown/orange timing belt is made of polyurethane and is complemented by a polyurethane and silicone coating. This polyurethane and silicone coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The polyurethane timing belt has a length of 920 mm, a width of 50 mm and has 92 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The yellow coating has a hardness of 60 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The polyurethane and silicone coating occurs in different hardnesses. The most common hardnesses are 25, 35, 50 and 60 Shore-A. A coating of silicone occurs primarily in the colors red and white.
USP-ID:
BAVB0140
Timing belt set 2003409758 | 50-T10-920 + 3 mm for Aquarius packaging machines
€350.00*
USP private label timing belt set 2003409758 functions by the action of vacuum. The drive belt consists of two combined parts, the timing belt (brown/orange) and the coating (yellow). The brown/orange timing belt is made of polyurethane and is complemented by a polyurethane and silicone coating. This polyurethane coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The polyurethane timing belt has a length of 920 mm, a width of 50 mm and has 92 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The red coating has a hardness of 60 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30, 50 and 60 Shore-A. A coating of silicone occurs mainly in the colors red and white. The silicone coating is temperature resistant up to 150 degrees Celsius. In addition, the drive belts are easy to clean.
USP-ID:
BAVB0147
Timing belt set 2004630595 | 30-T10-920 + 3 mm for Aquarius packaging machines
€175.00*
USP private label timing belt set 2004630595 function by vacuum. The drive belt consists of two combined parts, the timing belt (transparent) and the coating layer (blue). The transparent timing belt is made of neoprene and is completed with a linatex coating. This linatex coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The neoprene timing belt has a width of 25.4 mm and has 72 teeth. The tooth pitch is implemented in a type L variant. This means that the tooth pitch has a standard dimension of 9,525 mm. The red coating has a hardness of 60 Shore-A. All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The linatex coating occurs in different hardnesses. The most common hardnesses are 30, 35 and 60 Shore-A. A linatex coating occurs primarily in the colors red and white.
USP-ID:
BAVB0069
Timing belt set 2004630650 | 50 -T10-920 + 4 mm for Aquarius packaging machines
€390.00*
USP private label timing belt set 2004630650 functions by the action of vacuum. The drive belt consists of two combined parts, the timing belt (gray) and the coating layer (blue). The gray timing belt is made of polyurethane and is complemented by a silicone coating (SILAM). This silicone coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The polyurethane timing belt has a length of 920 mm, a width of 50 mm and has 92 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30, 50 and 60 Shore-A. A coating of silicone occurs mainly in the colors red, blue and white. The silicone coating is temperature resistant up to 150 degrees Celsius. In addition, the drive belts are easy to clean.
USP-ID:
BAVB0137
Timing belt set 2004630683 | 50-T10-920 + 4 mm for Aquarius packaging machines
€390.00*
USP private label timing belt set 2004630683 functions by vacuum. The drive belt consists of two combined parts, the timing belt (gray) and the coating layer (blue). The gray timing belt is made of polyurethane and is complemented by a silicone coating (SILAM). This silicone coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The polyurethane timing belt has a length of 920 mm, a width of 50 mm and has 92 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30,50 and 60 Shore-A. A coating of silicone occurs mainly in the colors red, blue and white. The silicone coating is temperature resistant up to 150 degrees Celsius. In addition, the drive belts are easy to clean.
USP-ID:
BAVB0144
Timing belt set 2004911238 | 32-T5-750 + 3 mm for Aquarius packaging machines
€275.00*
USP private label timing belt set functions by vacuum. The drive belt consists of two combined parts, the timing belt (gray/transparent) and the coating layer (blue). The gray/transparent timing belt is made of polyurethane and is completed with a silicone coating. This silicone coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The polyurethane timing belt has a length of 920 mm, a width of 50 mm and has 92 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The blue coating has a hardness of 50 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30, 50 and 60 Shore-A. A coating of silicone occurs mainly in the colors red and white. The silicone coating is temperature resistant to 150 degrees Celsius and is easy to clean.
USP-ID:
BAVB0073
Timing belt set 25-T10-560 + 6.4 mm for ILAPAK packaging machines
€90.00*
USP private label timing belt set functions by the action of vacuum. The drive belt consists of two combined parts, the timing belt (black) and the coating layer (red). The black timing belt is made of neoprene and is complemented by a natural rubber coating. This natural rubber coating is wear resistant due to the action of friction, but on the other hand it provides more grip.The neoprene timing belt has a length of 560 mm, a width of 25 mm and has 56 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The red coating has a hardness of 35 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The natural rubber coating occurs in different hardnesses. The most common hardnesses are 25, 35, 50 and 60 Shore-A. A natural rubber overlay occurs primarily in the colors red and white.
USP-ID:
BAFO0064
Timing belt set 25-T10-630 + 4 mm for OPEM packaging machines
€200.00*
USP private label timing belt set functions by the action of vacuum. The drive belts consist of two combined parts, the timing belt (gray) and the coating (blue). The gray timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The neoprene timing belt has a width of 25.4 mm and has 60 teeth. The tooth pitch is implemented in a type H variant. This means that the tooth pitch has a standard dimension of 9,525 mm. The red coating has a hardness of 35 Shore-A. In addition, the endless belt is temperature resistant to about 150 degrees Celsius and is easy to clean.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30, 35 and 50 Shore-A. A coating of silicone occurs mainly in the colors red, white, blue and transparent. Silicones are synthetic substances with a versatility of applications and are mostly heat-resistant and rubber-like. The term silicone is also referred to as SI.
USP-ID:
BAVB0037
Timing belt set 25-T10-630 + 4.5 mm for packaging machines
€140.00*
USP private label timing belt set functions by vacuum. The drive belt consists of two combined parts, the timing belt (red/orange) and the coating layer (yellow). The red/orange timing belt is made of polyurethane and is completed with a silicone coating. This silicone coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The polyurethane timing belt has a length of 630 mm, a width of 25 mm and has 63 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30, 50 and 60 Shore-A. A coating of silicone occurs mainly in the colors yellow, red and white. The silicone coating is temperature resistant up to 150 degrees Celsius. In addition, the drive belts are easy to clean.
USP-ID:
BAVB0039
Timing belt set 25-T10-630 + 7 mm for OPEM packaging machines
€220.00*
USP private label timing belts function by the action of friction. The timing belts consist of two combined parts, the timing belt (blue) and the coating (red). The blue timing belt is made of neoprene and is completed with a silicone coating. This silicone coating is less wear-resistant due to the action of friction, but on the other hand it provides more grip.The neoprene timing belt has a length of 630 mm width of 25 mm and has 63 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The red coating has a hardness of 35 Shore-A. In addition, the endless belt is temperature resistant to about 150 .C and is easy to clean.All coatings are applied as endless coverings, allowing the belts to run in either direction. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 30, 35 and 50 Shore-A. A coating of silicone occurs mainly in the colors red, white, blue and transparent. Silicones are synthetic substances with a versatility of applications and are mostly heat-resistant and rubber-like. The term silicone is also referred to as SI.
USP-ID:
BAVB0036
Timing belt set 270-L-100 + 7 mm
€65.00*
USP private label timing belt set functions by vacuum. The drive belt consists of two combined parts, the timing belt (black) and the coating layer (red). The black timing belt is made of neoprene and is completed with a linatex coating. This linatex coating is wear resistant due to the action of friction, but on the other hand it provides more grip.The neoprene timing belt has a length of 685.8 mm, a width of 25.4 mm and has 72 teeth. The tooth pitch is implemented in a type L variant. This means that the tooth pitch has a standard dimension of 9.525 mm.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The linatex coating occurs in different hardnesses. The most common hardnesses are 25, 30, 50 and 60 Shore-A. A linatex cover layer occurs mainly in the colors yellow, red and white. In addition, the drive belts are easy to clean.
USP-ID:
BAFO0057
Timing belt set 285-L-150 + 6.5 mm for packaging machines
€250.00*
USP private label timing belt functions by friction. The timing belt consists of two combined parts, the timing belt (black) and the coating layer (blue). The black timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is less abrasion resistant due to the action of friction, on the other hand, there is more grip.The neoprene timing belt has a length of 723.9mm, a width of 38.1mm and has 76 teeth. The tooth pitch is carried out in a type L variant. This means that the tooth pitch has a standard dimension of 9.525 mm. The red coating has a hardness of 50 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating comes in different hardnesses. The most common hardnesses are 25, 30 and 50 Shore-A. A silicone coating primarily occurs in red and blue colors. The silicone coating is temperature resistant to 150 degrees Celsius and is easy to clean.
USP-ID:
BAFO0096
Timing belt set 29-T10-630 + 4 mm for Kopas packaging machines
€75.00*
USP private label timing belt set functions by the action of friction. The drive belt consists of two combined parts, the timing belt (gray) and the coating (blue). The gray timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is less wear-resistant due to the action of friction, but on the other hand it provides more grip.The neoprene timing belt has a length of 630 mm, a width of 29 mm and has 63 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The red coating has a hardness of 35 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 35, 50 and 60 Shore-A. A coating of silicone occurs primarily in the colors red and white.
USP-ID:
BAFO0079
Timing belt set 29-T10-630 + 4 mm for ROVEMA packaging machines
€140.00*
USP private label timing belts function by vacuum. The timing belt consists of two combined parts, the timing belt (gray) and the coating layer (blue). The gray timing belt is made of neoprene and is completed with a linatex coating. This linatex coating is wear resistant due to the action of vacuum, but on the other hand it provides more grip.The neoprene timing belt has a width of 25.4 mm and has 72 teeth. The tooth pitch is implemented in a type L variant. This means that the tooth pitch has a standard dimension of 9,525 mm. The red coating has a hardness of 35 Shore-A. All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The linatex coating occurs in different hardnesses. The most common hardnesses are 30, 35 and 40 Shore-A. A linatex coating occurs primarily in the colors red and white.
USP-ID:
BAVB0048
Timing belt set 29-T10-630 + 6 mm for packaging machines
€312.00*
USP private label timing belt set functions by the action of friction. The timing belt consists of two combined parts, the timing belt (gray) and the coating (blue). The gray timing belt is made of neoprene and is complemented by a silicone coating. This silicone coating is less wear-resistant due to the action of friction, but on the other hand it provides more grip.The neoprene timing belt has a length of 630 mm, a width of 29 mm and has 63 teeth. The tooth pitch is implemented in a type T variant. This means that the tooth pitch has a standard dimension of 10 mm. The red coating has a hardness of 35 Shore-A.All coatings are applied as endless coverings, allowing the belts to run in both directions. In addition, polyurethane timing belts can be coated with the same materials.The silicone coating occurs in different hardnesses. The most common hardnesses are 25, 35, 50 and 60 Shore-A. A coating of silicone occurs primarily in the colors red and white.
USP-ID:
BAFO0078